Wednesday, June 30, 2010

THOR




Good day! I lay, arms and legs of a child's toy of a robot .... And then caught the eye of a couple of concepts about walking platform .... In the process, I decided to make a tracked howitzer with a 35-foot-wide .... So, the case was made of three plastic plates, which was symmetrical, with two sides (left and right), apply for the relief of the fortress construction .. were also drilled and bolted on the screws are the same arms and legs, with one pair (front) is made up .... At the bottom was glued various imitation of undercarriage, which were glued on track Tehnologist tank truck shelves are made from the wings of Tehnologist aircraft gun .... and the construction itself, holding it in position, was made of polystyrene sheet with a pre-notched and grooves, are inserted into the various model parts (not noted) and the rear roller from the tank to an unknown scale ... Cannon assembled from parts Tehnologovskih models and polystyrene, the gun goes hose - this is nothing like an isolated wire ligation thread ..... Barrel itself - of the cap from the marker ..... Cab driver mechanics (and part of the operator howitzer) is made from the handle of child gun with a drilled hole inspection ...... The engine is made of two exhaust pipes of a child's toy and model parts, blanks at the ends of the legs of the keyboard buttons ..... Handrails on the cabin and back - of trucks from HANOMAG ..... Dyed acrylic brush, scrapes, dry brush, warning signs and other hand-painted ..... Enjoyed the assembly of this unit, it came quickly and effectively!

Friday, June 25, 2010

AwesomeBUG




So ...... so going to start with the feet, as homonoid robots I have not done. Stops are assembled from parts of the toys my son and added keys from the keyboard and rollers from the tanks. Leg (drumstick and thigh) are part of the model technologist, plus it added rollers and keys, again, well, as a kind of shield ...... in the joints and hinges star of tanks. Both legs combined with a basin made from the tower of the BT, a few microchips, capacitors, and a few details on the model technologist. Housing made on the pin that is inserted into the pelvis robot, specifically - in the tower and attached BT tower and secured from the inside.Chast body with a head composed of the instrument panel of a toy car and a half of the tank (do not even know the name). The shoulders are made up of inverted seat of my son's toy car (which is broken), and clips from the old tape recorder. Guns on their shoulders - from technologist .... Hand made of gates, keys, headphones, and parts and keyboard parts ........ Tehnologist skirt front and back - it's a mouse body, beneath different microchips, wires, capacitors and tubes. Large pipes - boosters copper, acrylic paint them with a brush ..... Here, in general, like all ..... Oh yeah, I forgot that the head is made of laser eye mouse itself and the various parts, I do not know from what .. Now everything .... ......