THOR

Good day! I lay, arms and legs of a child's toy of a robot .... And then caught the eye of a couple of concepts about walking platform .... In the process, I decided to make a tracked howitzer with a 35-foot-wide .... So, the case was made of three plastic plates, which was symmetrical, with two sides (left and right), apply for the relief of the fortress construction .. were also drilled and bolted on the screws are the same arms and legs, with one pair (front) is made up .... At the bottom was glued various imitation of undercarriage, which were glued on track Tehnologist tank truck shelves are made from the wings of Tehnologist aircraft gun .... and the construction itself, holding it in position, was made of polystyrene sheet with a pre-notched and grooves, are inserted into the various model parts (not noted) and the rear roller from the tank to an unknown scale ... Cannon assembled from parts Tehnologovskih models and polystyrene, the gun goes hose - this is nothing like an isolated wire ligation thread ..... Barrel itself - of the cap from the marker ..... Cab driver mechanics (and part of the operator howitzer) is made from the handle of child gun with a drilled hole inspection ...... The engine is made of two exhaust pipes of a child's toy and model parts, blanks at the ends of the legs of the keyboard buttons ..... Handrails on the cabin and back - of trucks from HANOMAG ..... Dyed acrylic brush, scrapes, dry brush, warning signs and other hand-painted ..... Enjoyed the assembly of this unit, it came quickly and effectively!